Refractories for Medical Waste Incinerator
A waste incineration & power generation-grade refractory product engineered for reliable high-temperature service.
Refractories for Medical Waste Incinerator
A waste incineration & power generation-grade refractory product engineered for reliable high-temperature service.
The following table lists the key technical properties of Refractories for Medical Waste Incinerator. For full data sheets, mix-design recommendations or installation instructions, contact our engineering team.
Technical Specifications
|
Item |
Index | ||
|
Refractoriness(℃) |
≥1790 | ||
|
Service Temperature℃ |
>1500 | ||
|
Thermal Conductivity(w/m.k) 1000℃hot face |
1.5 | ||
|
Linear Change Rate(%) |
815℃ |
0~-0.2 | |
|
1100℃ |
0~-0.2 | ||
|
Compressive strength (MPa) |
110℃ |
≥65 | |
|
815℃ |
≥85 | ||
|
1100℃ |
≥95 | ||
|
Modulus of Rupture(MPa) |
110℃ |
≥10 | |
|
815℃ |
≥15 | ||
|
1100℃ |
≥18 | ||
|
Bulk Density(after drying) (g/cm3) |
2.9 | ||
|
Apparent Porosity (%) |
<17 | ||
|
Chemical Composition |
Al2O3 % |
≥80 | |
|
Fe2O3 % |
≤1.0 | ||
|
Thermal shock cycles (times) |
Water-cooled |
≥25 | |
|
Air-cooled |
≥50 | ||
|
wear loss (cc) |
≤8 | ||
Application
Suitable for use in the Refractories for Waste Incineration & Power Generation. This product page has been viewed 3212 times.